Article no.
10 73 6482 0005/013
Pivoting bearings DIN ISO 12240-1 (DIN 648) K series maintenance-free version with threaded bolt
The product has been added to the shopping cart successfully
Please complete all the filters.
Size / Identifier
5
Material group
Steel
Surface
galvanised
Lubrication
no lubrication required; the ball slides on the PTFE fabric located in the bearing shell; working range: -150 °C to +250 °C
d
5
d Tolerance
H7
A
6
B
8
d1
7,7
d2
16
d2 Tolerance
h6
d6
7,8
l6
16
l7
5
l8
9
sw1
7
Static basic load rating C0 (kN)
12,5
Permissible rpm*
600
Angle of misalignment α°
13
Bearing radial tolerance in mm min. - max.
0,005 - 0,035
Mass (g) per piece
13
Material
outer ring: undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
bearing shell: undercut steel 1.0718 (11SMnPb30+C), galvanised, with glued-in PTFE fabric
internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished
threaded bolt: undercut steel 1.0718 (11SMnPb30+C), galvanised
* only recommended for short-term running
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing K7, for light-alloy housing M7
load high - for steel housing M7, for light-alloy housing N7
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing K7, for light-alloy housing M7
load high - for steel housing M7, for light-alloy housing N7
Product information "Pivoting bearings DIN ISO 12240-1 (DIN 648) K series maintenance-free version with threaded bolt"
Filter - 9 out of 9 products selected
Additional columns
Choose columns
| Ordernumber | Size / Identifier | Material group | Surface | Lubrication | Article no. | d | d Tolerance | A | B | d1 | d2 | d2 Tolerance | d6 | l6 | l7 | l8 | sw1 | Static basic load rating C0 (kN) | Permissible rpm* | Angle of misalignment α° | Bearing radial tolerance in mm min. - max. | Mass (g) per piece | Shop |
|---|
* only recommended for short-term running
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing K7, for light-alloy housing M7
load high - for steel housing M7, for light-alloy housing N7
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing K7, for light-alloy housing M7
load high - for steel housing M7, for light-alloy housing N7