+49 9345 6700

Pivoting bearings DIN ISO 12240-1 (DIN 648) K series maintenance-free version stainless steel with threaded bolt

suitable for high dynamic pressure loads and tensile forces
Price per piece
Delivery time
Accessories for
Shopping cart
Private customer (with VAT)
Corporate customer (without VAT)
Total price

Prices incl. VAT plus shipping costs

107464820005000
10 74 6482 0005/000
Article no.
10 74 6482 0005/000
Size / Identifier
5
Material group
Stainless steel A2 quality
Surface
bright
Lubrication
no lubrication required; the ball slides on the PTFE fabric located in the bearing shell; working range: -50 °C to +150 °C
d
5
d Tolerance
H7
A
6
B
8
d1
7,7
d2
16
d2 Tolerance
h6
d6
7,8
l6
16
l7
5
l8
9
sw1
7
Static basic load rating C0 (kN)
12,5
Permissible rpm*
600
Angle of misalignment α°
13
Bearing radial tolerance in mm min. - max.
0,005 - 0,035
Mass (g) per piece
13
Material

outer ring: stainless steel 1.4305 (X8CrNiS18-9), lathe work

bearing shell: special bronze CuSn8 with glued-in PTFE fabric, alternative: stainless steel 1.4571 (X6CrNiMoTi17-12-2)

internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, hard chrome-plated on the bearing surface, alternative: stainless steel 1.4034 (X46Cr13), hardened, grinded, polished or stainless steel 1.4404 (X2CrNiMo17-12-2), unhardened, grinded, polished

threaded bolt: stainless steel 1.4305 (X8CrNiS18-9)

* only recommended for short-term running
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing K7, for light-alloy housing M7
load high - for steel housing M7, for light-alloy housing N7
Product information "Pivoting bearings DIN ISO 12240-1 (DIN 648) K series maintenance-free version stainless steel with threaded bolt"

Filter - 8 out of 8 products selected

Additional columns

Choose columns
Ordernumber Size / Identifier Material group Surface Lubrication Article no. dd ToleranceABd1d2d2 Toleranced6l6l7l8sw1Static basic load rating C0 (kN)Permissible rpm*Angle of misalignment α°Bearing radial tolerance in mm min. - max.Mass (g) per piece Shop
* only recommended for short-term running
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing K7, for light-alloy housing M7
load high - for steel housing M7, for light-alloy housing N7