Stand: 24.02.2019
Rod end DIN 12240-4 / DIN 648 / mbo 50 female thread product image

Rod ends DIN ISO 12240-4 (DIN 648) K series standard version female thread

can be regreased, suitable for axial thrusts

Rod end K series standard version female thread

Static basic load rating C0 (kN)

The static basic load rating C0 (see additional columns) denotes the value with which a rod end can in normal applications with a static load be stressed in the weakest cross-section without being permanently deformed. It represents the permissible radial bearing strain at rest. The basic load ratings quoted have been calculated using the respective material characteristic values and can be verified by tensile experiments at room temperature. The yield point was used to 80%, making the safety factor until yield start 1.25.

The static basic load rating also enables the permissible thrust load to be calculated:

Fa = Fa perm. = p • C0 (kN)

p = < / ~ 0.4 for rod ends K series standard version

Dynamic basic load ratings for rod ends are available on request.

Rod end DIN 12240-4 / DIN 648 / mbo 50 female thread Maßbild

Filter - 19 out of 19 products selected

Additional columns

Choose columns
Ordernumber Size / Identifier Material group Surface Thread version Lubrication Article no. dd ToleranceABd1d2d3d4d5h1l3l4swStatic basic load rating C0 (kN)Permissible rpm*Angle of misalignment α°Bearing radial tolerance in mm min. - max.Mass (g) per pieceCETOP Shop
* only recommended for short-term running
Rod ends DIN ISO 12240-4 (DIN 648) K series standard version female thread | 5 | galvanised | Steel

Details of the selected product

  • 10 50 6481 1005/013
  • 5
  • Steel
  • galvanised
  • via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +200 °C; initial lubrication must be performed during initial operation
  • housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised

    from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised

    bearing shell: special brass CuZn38Al1

    internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated


Please first choose whether you are a private or corporate customer

Currently out of stock

Private customer (with VAT)
Corporate customer (without VAT)
Rod ends are used when static or dynamic forces must be transmitted during tilting, turning or swivelling movements.

You are in the mbo shop. Please choose the article you require and activate an inquiry/order.

More about the shop

Do you have any questions or would you like to talk to us in person? We would be delighted to advise you in person!
Tel. +49 9345 6700

To the contact form