Enquire now
Your contact: Daniel Fleuchaus +49 9345/670-143
Martensitic stainless steel C1 according to ISO 3506-1
hardened and tempered to a hardness of 460 HV30 up to 560 HV30
Your contact: Daniel Fleuchaus +49 9345/670-143
Product information "Parallel pins DIN EN ISO 8734"

Example for ordering
Hardened parallel pin made of steel, type A, with nominal diameter d1 = 6 mm
and nominal length l = 30 mm; parallel pin ISO 8734 - 6 x 30 - A - St
Article no.: 10 16 0006 0030/001
Article no.: 10 16 0006 0030/001

Material
steel, bright
Type A: pin through-hardened, hardness 550 HV30 up to 650 HV30
Type B: pin case-hardened, surface hardness 600 HV1 up to 700 HV1
case-hardening depth 0,25 up to 0,4 mm: 550 HV1 min.
Type A: pin through-hardened, hardness 550 HV30 up to 650 HV30
Type B: pin case-hardened, surface hardness 600 HV1 up to 700 HV1
case-hardening depth 0,25 up to 0,4 mm: 550 HV1 min.
Martensitic stainless steel C1 according to ISO 3506-1
hardened and tempered to a hardness of 460 HV30 up to 560 HV30
Surface roughness
Ra ≤ 0,8 μm
Alternatively also available according to DIN 6325