Rod end DIN ISO 12240-4 K high performance version with sealing female thread 14 M14 Steel galv.
can be regreased, suitable for higher rotation speeds
Please first choose whether you are a private or corporate customer!
We have unfortunately had to adapt the price of this item due to cost increases in our supply chain. We would be happy to work with you to find a solution to minimise the impact of this increase. Please get in touch with your contact person to discuss this:
The quantity currently authorised for the shop has been exceeded. However, we would be delighted to receive a request from you!
Unfortunately, there is a minimum order volume of [[minsurface]] units due to the coating used. Alternatively, you can receive the products uncoated (bright, lightly oiled) or in stainless steel (1.4305, 1.4301 or 1.4404) even as a one-off part:
The product was successfully added to your shopping cart
[[ title ]]
Price per piece
[[ formatedPrice ]]On request
from [[ price.from ]] pieces only [[ price.price ]]
Optional
Delivery time
[[ computedDelivery(deliveryData?.deliveryTimeDays) ]]
On request
still [[ stock ]] pieces in stock
Fast-track this part (max. 400 units) through our production facility. Shorten the delivery time by 1-2 working days. We are currently exclusively testing this delivery service for Germany.
Accessories for [[ title ]]
Price per piece [[ formatTaxPrice(aprice[article.number]) ]]On request
|
Selection for data retrieval
On request
[[ computedDelivery(adeliveryData[article.number]?.deliveryTimeDays) ]]
Shopping cart
Total price
[[ formatedSumprice ]]On request
incl. VAT
plus shipping costs
* only recommended for short-term running
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
Article no.
10 51 6483 1014/013
Identifier
Rod end DIN ISO 12240-4 (DIN 648) K series high performance version with sealing female thread
Size
14 M14
Material group
Steel
Surface
galvanised
Material
Housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised
from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised
size 50 thermal treatment steel 1.0503 (C45), lathe work, galvanised
Bearing shell: special bronze CuSn8
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
Sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline
Fitting rings: brass
Distance liner: stainless steel 1.4305 (X8CrNiS18-9)
22
d Tolerance
H7
B Tolerance
≈
Thread version
Regular thread right
Static basic load rating C0 (kN)
21
Permissible rpm*
750
Angle of misalignment a°
12
Bearing radial tolerance in mm min. - max.
0,010 - 0,040
Mass (g) per piece
170
Lubrication
via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
needs maintenance
Thread
Female thread
Threaded bolt
No
Sealing
Yes
Suitable for clevises
No
Temperature
-30 °C - +120 °C