Rod end DIN ISO 12240-4 K series maintenance-free for high load male thread 35 M36FG Steel galv.
suitable for high dynamic pressure loads and tensile forces
Please first choose whether you are a private or corporate customer!
We have unfortunately had to adapt the price of this item due to cost increases in our supply chain. We would be happy to work with you to find a solution to minimise the impact of this increase. Please get in touch with your contact person to discuss this:
The quantity currently authorised for the shop has been exceeded. However, we would be delighted to receive a request from you!
Unfortunately, there is a minimum order volume of [[minsurface]] units due to the coating used. Alternatively, you can receive the products uncoated (bright, lightly oiled) or in stainless steel (1.4305, 1.4301 or 1.4404) even as a one-off part:
The product was successfully added to your shopping cart
[[ title ]]
Price per piece
[[ formatedPrice ]]On request
from [[ price.from ]] pieces only [[ price.price ]]
Optional
Delivery time
[[ computedDelivery(deliveryData?.deliveryTimeDays) ]]
On request
still [[ stock ]] pieces in stock
Fast-track this part (max. 400 units) through our production facility. Shorten the delivery time by 1-2 working days. We are currently exclusively testing this delivery service for Germany.
Accessories for [[ title ]]
Price per piece [[ formatTaxPrice(aprice[article.number]) ]]On request
|
Selection for data retrieval
On request
[[ computedDelivery(adeliveryData[article.number]?.deliveryTimeDays) ]]
Shopping cart
Total price
[[ formatedSumprice ]]On request
incl. VAT
plus shipping costs
* only recommended for short-term running
Article no.
18 54 6481 2035/013
Identifier
Rod end DIN ISO 12240-4 (DIN 648) K series maintenance-free version for high load male thread
Size
35 M36FG
Material group
Steel
Surface
galvanised
Material
Housing: thermal treatment steel 1.7225 (42CrMo4), forged, galvanised
Bearing shell: undercut steel 1.0718 (11SMnPb30+C), galvanised with glued-in PTFE fabric on the bearing surface
Internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
165
d Tolerance
H7
Thread version
Fine-pitch thread right
Static basic load rating C0 (kN)
230
Permissible rpm*
110
Angle of misalignment a°
19
Bearing radial tolerance in mm min. - max.
0,005 - 0,055
Mass (g) per piece
1600
Lubrication
no lubrication required; the ball slides on the PTFE fabric located in the bearing shell; working range: -150 °C to +250 °C
Rod end_Pivoting bearing
Rod end
Series
K series
Maintenance
maintenance-free
Thread
Male thread
Threaded bolt
No
Sealing
No
Suitable for clevises
No
Temperature
-150 °C - +250 °C