+49 9345 6700
Pivoting bearings DIN ISO 12240-1 (DIN 648) K series high performance version with threaded bolt

Pivoting bearings DIN ISO 12240-1 (DIN 648) K series high performance version with threaded bolt

Price per piece
Delivery time
Accessories for
Shopping cart
Private customer (with VAT)
Corporate customer (without VAT)
Total price

Prices incl. VAT plus shipping costs

107164820005013
10 71 6482 0005/013
Article no.
10 71 6482 0005/013
Size / Identifier
5
Material group
Steel
Surface
galvanised
Lubrication
regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
d
5
d Tolerance
H7
A
6
B
8
d1
7,7
d2
16
d2 Tolerance
h6
d6
7,8
l6
16
l7
5
l8
9
sw1
7
Static basic load rating C0 (kN)
19,8
Permissible rpm*
1200
Angle of misalignment α°
13
Bearing radial tolerance in mm min. - max.
0,005 - 0,040
Mass (g) per piece
13
Material

outer ring: undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised

bearing shell: special bronze CuSn8

internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished

threaded bolt: undercut steel 1.0718 (11SMnPb30+C), galvanised

* only recommended for short-term running
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing J7/H7, for light-alloy housing K7
load high - for steel housing K7, for light-alloy housing M7
Product information "Pivoting bearings DIN ISO 12240-1 (DIN 648) K series high performance version with threaded bolt"

Filter - 9 out of 9 products selected

Additional columns

Choose columns
Ordernumber Size / Identifier Material group Surface Lubrication Article no. dd ToleranceABd1d2d2 Toleranced6l6l7l8sw1Static basic load rating C0 (kN)Permissible rpm*Angle of misalignment α°Bearing radial tolerance in mm min. - max.Mass (g) per piece Shop
* only recommended for short-term running
Recommended fits for housing bores for installing pivoting bearings:
load normal - for steel housing J7/H7, for light-alloy housing K7
load high - for steel housing K7, for light-alloy housing M7