Stand: 22.09.2018
Rod end DIN 12240-4 / DIN 648 / mbo 54 high load + male thread product image

Rod ends DIN ISO 12240-4 (DIN 648) K series maintenance-free version for high load male thread

suitable for high dynamic pressure loads and tensile forces

Rod end K series maintenance-free version for high load male thread


Static basic load rating C0 (kN)

The static basic load rating C0 (see additional columns) denotes the value with which a rod end can in normal applications with a static load be stressed in the weakest cross-section without being permanently deformed. It represents the permissible radial bearing strain at rest. The basic load ratings quoted have been calculated using the respective material characteristic values and can be verified by tensile experiments at room temperature. The yield point was used to 80%, making the safety factor until yield start 1.25.

The static basic load rating also enables the permissible thrust load to be calculated:

Fa = Fa perm. = p • C0 (kN)

p = < / ~ 0.2 for rod ends K series maintenance-free version for high load

Dynamic basic load ratings for rod ends are available on request.

Rod end DIN 12240-4 / DIN 648 / mbo 54 high load + male thread Maßbild

Filter - 19 out of 19 products selected

Additional columns

Choose columns
Ordernumber Size / Identifier Material group Surface Thread version Lubrication Article no. dd ToleranceABd1d2d3hl1l2Static basic load rating C0 (kN)Permissible rpm*Angle of misalignment α°Bearing radial tolerance in mm min. - max.Mass (kg) per piece Shop
* only recommended for short-term running
Rod ends DIN ISO 12240-4 (DIN 648) K series maintenance-free version for high load male thread | 6 | galvanised | Steel

Details of the selected product

  • 10 54 6481 2006/013
  • 6
  • Steel
  • galvanised
  • no lubrication required; the ball slides on the PTFE fabric located in the bearing shell; working range: -150 °C to +250 °C
  • housing: thermal treatment steel 1.7225 (42CrMo4), forged, galvanised

    bearing shell: undercut steel 1.0718 (11SMnPb30+C), galvanised with glued-in PTFE fabric on the bearing surface

    internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated

Pricing

Please first choose whether you are a private or corporate customer
€12.55
€12.55

Currently out of stock

Private customer (with VAT)
Corporate customer (without VAT)
Shop

You are in the mbo shop. Please choose the article you require and activate an inquiry/order.

More about the shop
Contact

Do you have any questions or would you like to talk to us in person? We would be delighted to advise you in person!
Tel. +49 9345 6700

To the contact form