Rod end K series maintenance-free version for high load with sealing male thread
Static basic load rating C0 (kN)
The static basic load rating C0 (see additional columns) denotes the value with which a rod end can in normal applications with a static load be stressed in the weakest cross-section without being permanently deformed. It represents the permissible radial bearing strain at rest. The basic load ratings quoted have been calculated using the respective material characteristic values and can be verified by tensile experiments at room temperature. The yield point was used to 80%, making the safety factor until yield start 1.25.
The static basic load rating also enables the permissible thrust load to be calculated:
Fa = Fa perm. = p • C0 (kN)
p = < / ~ 0.2 for rod ends K series maintenance-free version for high load with sealing
Dynamic basic load ratings for rod ends are available on request.
Filter - 6 out of 6 products selected
|Ordernumber||Size / Identifier||Material group||Surface||Thread version||Lubrication||Article no.||d||d Tolerance||A||B||B Tolerance||d1||d2||d3||d7||d8||d9||h||l1||l2||Static basic load rating C0 (kN)||Permissible rpm*||Angle of misalignment α°||Bearing radial tolerance in mm min. - max.||Mass (kg) per piece||Shop|
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
Details of the selected product
- Article no. 105464832008013 10 54 6483 2008/013
- Size / Identifier 8
- Material group Steel
- Surface galvanised
- Lubrication no lubrication required; the ball slides on the PTFE fabric located in the bearing shell; working range: -150 °C to +250 °C
- Data sheet
housing: thermal treatment steel 1.7225 (42CrMo4), forged, galvanised
bearing shell: undercut steel 1.0718 (11SMnPb30+C), galvanised with glued-in PTFE fabric on the bearing surface
internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated
sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline
fitting rings: brass
distance liner: stainless steel 1.4305 (X8CrNiS18-9)
You are in the mbo shop. Please choose the article you require and activate an inquiry/order.More about the shop