+49 9345 6700
Rod ends DIN ISO 12240-4 (DIN 648) K series high performance version male thread

Rod ends DIN ISO 12240-4 (DIN 648) K series high performance version male thread

Price per piece
Delivery time
Accessories for
Shopping cart
Private customer (with VAT)
Corporate customer (without VAT)
Total price

Prices incl. VAT plus shipping costs

105164812002013
10 51 6481 2002/013
Article no.
10 51 6481 2002/013
Size / Identifier
2
Material group
Steel
Surface
galvanised
Lubrication
from size 6 via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
d
2
d Tolerance
H7
A
3,6
B
4,5
d1
2,6
d2
9
d3
M2 x 0,4
Thread version
Regular thread right
h
20
l1
12
l2
24,5
Static basic load rating C0 (kN)
0,6
Permissible rpm*
-
Angle of misalignment α°
16
Bearing radial tolerance in mm min. - max.
0,005 - 0,035
Mass (g) per piece
3
Material

housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised

from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised

size 50 thermal treatment steel 1.0503 (C45), lathe work, galvanised

bearing shell: special bronze CuSn8

internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated

* only recommended for short-term running
Rod end K series high performance version male thread Static basic load rating C0 (kN)... more
Product information "Rod ends DIN ISO 12240-4 (DIN 648) K series high performance version male thread"

Rod end K series high performance version male thread


Static basic load rating C0 (kN)

The static basic load rating C0 (see additional columns) denotes the value with which a rod end can in normal applications with a static load be stressed in the weakest cross-section without being permanently deformed. It represents the permissible radial bearing strain at rest. The basic load ratings quoted have been calculated using the respective material characteristic values and can be verified by tensile experiments at room temperature. The yield point was used to 80%, making the safety factor until yield start 1.25.

The static basic load rating also enables the permissible thrust load to be calculated:

Fa = Fa perm. = p • C0 (kN)

p = < / ~ 0.2 for rod ends K series high performance version

Dynamic basic load ratings for rod ends are available on request.

Filter - 27 out of 27 products selected

Additional columns

Choose columns
Ordernumber Size / Identifier Material group Surface Thread version Lubrication Article no. dd ToleranceABd1d2d3hl1l2Static basic load rating C0 (kN)Permissible rpm*Angle of misalignment α°Bearing radial tolerance in mm min. - max.Mass (g) per piece Shop
* only recommended for short-term running