Stand: 24.02.2019
Rod end DIN 12240-4 / DIN 648 / mbo 51 sealing + male thread product image

Rod ends DIN ISO 12240-4 (DIN 648) K series high performance version with sealing male thread

can be regreased, suitable for higher rotation speeds

Rod end K series high performance version with sealing male thread

Static basic load rating C0 (kN)

The static basic load rating C0 (see additional columns) denotes the value with which a rod end can in normal applications with a static load be stressed in the weakest cross-section without being permanently deformed. It represents the permissible radial bearing strain at rest. The basic load ratings quoted have been calculated using the respective material characteristic values and can be verified by tensile experiments at room temperature. The yield point was used to 80%, making the safety factor until yield start 1.25.

The static basic load rating also enables the permissible thrust load to be calculated:

Fa = Fa perm. = p • C0 (kN)

p = < / ~ 0.2 for rod ends K series high performance version with sealing

Dynamic basic load ratings for rod ends are available on request.

Rod end DIN 12240-4 / DIN 648 / mbo 51 sealing + male thread Maßbild

Filter - 7 out of 7 products selected

Additional columns

Choose columns
Ordernumber Size / Identifier Material group Surface Thread version Lubrication Article no. dd ToleranceABB Toleranced1d2d3d7d8d9hl1l2Static basic load rating C0 (kN)Permissible rpm*Angle of misalignment α°Bearing radial tolerance in mm min. - max.Mass (g) per piece Shop
* only recommended for short-term running
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
Rod ends DIN ISO 12240-4 (DIN 648) K series high performance version with sealing male thread | 8 | galvanised | Steel

Details of the selected product

  • 10 51 6483 2008/013
  • 8
  • Steel
  • galvanised
  • via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
  • housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised

    from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised

    size 50 thermal treatment steel 1.0503 (C45), lathe work, galvanised

    bearing shell: special bronze CuSn8

    internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated

    sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline

    fitting rings: brass

    distance liner: stainless steel 1.4305 (X8CrNiS18-9)


Please first choose whether you are a private or corporate customer

The selected article is unfortunately not available in the shop at the moment. However, we would be delighted to receive a request from you!

3 - 5 days

Private customer (with VAT)
Corporate customer (without VAT)

You are in the mbo shop. Please choose the article you require and activate an inquiry/order.

More about the shop

Do you have any questions or would you like to talk to us in person? We would be delighted to advise you in person!
Tel. +49 9345 6700

To the contact form